Preparing a measuring room for a workshop visit

Preparing a measuring room for a uniform fitting visit: a checklist for HR and admin before, during and after the session, following Mon Amie's six steps.

Preparing a measuring room for a workshop visit

When Mon Amie's mobile measuring team comes to your office, the session runs smoothly when the admin team has three things ready: a private, well-lit space, a staff list with employee IDs and shift patterns, and one fixed point of contact for the whole session. This guide is a checklist for HR and administration to work through before, during and after measuring day.

Where measuring sits in the process

Measuring is step four of Mon Amie's six-step process, and it comes after your company has signed off the sample in step three. By the time the team arrives, fabric and style are settled; what remains is taking each person's measurements. Mon Amie measures at your office on your schedule, including outside office hours, and stores measurements under each employee ID so people already measured need not be measured again in later orders. Our workshop covers 1,000 m² with more than 80 skilled tailors; the company profile gives more on our production capability.

Preparing the space

Mon Amie will discuss exactly what space is needed when the session is booked. These are points admin teams usually consider:

  • A private room or corner: a small meeting room or training room is common, so staff feel at ease.
  • Enough standing room: a tape goes around the body, so there must be space to turn and raise arms.
  • Clear lighting: it helps the team see posture and measuring points properly.
  • A mirror: so staff can see their own posture, and for trying on a sample if one is used.
  • A chair and hooks: somewhere to leave jackets, bags and phones.
  • A waiting spot nearby: so the next person is not standing in a corridor.

Here is one of Mon Amie Uniform's projects.

Mon Amie Uniform on site with Weset English Center
Mon Amie Uniform on site with Weset English Center

Preparing the list and schedule

The clearer the list, the fewer interruptions on the day. A simple table with these columns is enough:

Column Content Why it matters
Name and employee ID Spelled correctly, with the right ID Measurements are stored under the employee ID
Department and shift For example office, reception, morning shift Lets you schedule by group without pulling people off their posts
Uniform items Jacket, shirt, trousers, skirt and so on So the team knows which measurements to take
Personal notes Anything staff want to mention in advance So it can be handled privately

Schedule by department rather than alphabetically. Shift workers outside office hours, night or rotating shifts can be flagged in advance so Mon Amie can plan accordingly. People travelling or working remotely should be told early so alternatives can be arranged.

What to tell staff beforehand

A short message sent ahead usually keeps the session tidy:

  1. The time and place for their group.
  2. Wear thin, well-fitting clothes and avoid thick jackets or very tight garments, so measurements reflect the real body.
  3. Bring the shoes you normally wear to work, because trouser and skirt lengths are set against them.
  4. Arrive in your group's slot.
  5. Anything personal to mention can be raised with HR beforehand.

During and after the session

Appoint one fixed contact for the session: the person who holds the list, calls each group in and ticks off who has been done. Starting with a large department shows early where the schedule needs adjusting.

Afterwards, admin cross-checks the list to see who is missing and agrees with Mon Amie how to arrange them, depending on both sides' schedules. Production then follows at the workshop, with delivery to your site, fitting and on-the-spot adjustment; allow 4–6 weeks after sample approval for measuring, making and delivery. Staff who join later are measured individually and made to the approved pattern.

To request a quotation and arrange a consultation at your office, use our quote page or call 0888.111.118 (the same number on Zalo).

Frequently asked questions

What should staff wear to be measured?

Thin, well-fitting clothes, avoiding thick jackets, very tight garments or layers, so the tape follows the real shape. They should also bring the shoes they usually wear to work, since trouser and skirt lengths depend on them.

Can measuring be scheduled outside office hours?

Yes. Mon Amie measures on site to your company's schedule, including outside office hours, so shift teams can be given separate sessions.

Who should be our point of contact on the day?

One person from HR or administration who holds the list and knows each department's schedule. That person calls each group in, ticks off who has been measured and stays in touch with the measuring team, rather than several people coordinating at once.

How are people who join after measuring day handled?

New staff are measured individually and made to the approved pattern. Measurements of people already measured are stored under employee IDs, so later orders do not need re-measuring them.

0888.111.118Message on Zalo